Description
FEATURES
▪ Matte-textured, colored sand
Elegant and luxury, distinguished with exceptional
quality
▪
High hardness, abrasion resistant, and ease of cleaning
▪
▪ Low odor
▪ Resistant to weathering and aging, ensuring
long-lasting performance
▪ Environmentally friendly
USES
Suitable for grouting applications on most types of
ceramic, porcelain and non-absorbent tiles for indoor
wet areas.
PRODUCT INFORMATION
Packaging 350ML
Colour 8 colours
Shelf life 12months
Storage conditions Store unopened products in a dry, cool, and ventilated place.
Shore D Hardness ≥55 (GB/T 531.1)
Abrasion resistance ≤250 mm³
Compressive strength ≥35 MPa
Flexural-strength ≥20 MPa
Shrinkage ≤1.5 mm/m
Service temperature 5-35°C
Water absorption ≤0.1 g
Mixing ratio Part A: Part B= 1:1
Curing conditions Allow the grout to cure for 24 hours at 20-30°C before touching or allowing
traffic.
APPLICATION
The width of the joint should be from 1mm to
5mm to have good decorative effect.
▪
The surface (especially the tile joint) should be clean,
dry, free of oil, dust debris residue.
▪
Wax the tile surface (especially the gap between
tiles) before grouting to make it easier to remove
grout residue afterward.
▪
Open the SikaCeram-855 and load it into the specialized grout gun, making sure both sides are securely
locked in place.
▪
Press the grout gun to release air from both components until they dispense simultaneously. Clean any
remaining material, then attach the specialized
